Alloy Steel Flanges
ASTM / ASME A182 F1, F5, F9, F11, F22, F91 Alloy Steel Flanges Manufacturer & Exporter in India.
Alloy Steel Socket Weld Flanges, Alloy Steel Slip on Flanges, Alloy Steel Blind Flanges, Alloy Steel Reducing Flanges, Alloy Steel Threaded Flanges Stockist & Exporter in India
ACE ALLOYS LLP is one of the prominent in exporting & stocking of Alloy Steel Pipe Flanges , where the surface of it is likely to have poorer wear resistance than the carbon - rich case of a carburized steel of equal hardness. Exceptions are nitride parts, which have better wear resistance than would be expected from the carbon content alone.
Care must be taken in heat treatment of Alloy Steel Slip On Flanges from ACE ALLOYS, however, because toughness may be decreased substantially by temper brittleness — a form of embrittlement developed by slow cooling through the range of 900 Degree F to 600 Degree F, or by holding or tempering in this range. Fully hardened – and – tempered and low - carbon alloy steels have a good combination of strength and toughness, both at room and low temperature.
For any combination of Alloy Steel Blind Flanges and heat treatment, three factors tend to decrease toughness: low service temperature, high loading rates, and stress concentrations or residual stress. In all types of alloy steel from ACE ALLOYS, the alloying elements tend to form carbides or compounds, rather than simply being uniformly mixed in with the iron and carbon. While in a molten state, these Alloy Steel Weld Neck Flanges are exposed to a vacuum which removes hydrogen and, to a lesser degree, oxygen and nitrogen. ACE ALLOYS also offer these AS Flanges in different sizes, shapes and designs as per customers’ specifications at affordable rates.
Alloy Steel Forged Flanges, Alloy Steel Weld Neck Flanges, Alloy Steel Plate Flanges, Alloy Steel Large Diameter Flanges Dealer & Wholesaler
|Standards||ANSI Flanges, ASME Flanges, API, MSSP, BS Flanges, DIN Flanges, EN Flanges, NACE etc.|
|Dimension||150#, 300#, 600#, 900#, 1500#, 2500#. PN6, PN10, PN16, PN25, PN40, PN64 etc.|
|Grade||ASTM / ASME A182 F1 / F5 / F9 / F11 / F22 / F91.|
|Class/ Pressure||150#, 300#, 400 #, 600#, 900#, 1500# & 2500#|
|Size||½” to 36″|
|Wall Thickness||SCH.10, 20, 30, 40, 80, 120, 160, STD, XS, XXS.|
|Type||Slip on Flanges – SORF, Weld neck Flanges – WNRF, Socket weld Flanges – SWRF, Blind Flanges – BLRF
Lapped joint Flanges, Screwed Flanges, Long weld neck Flanges, Reducing Flanges, Spectacle Flanges, Ring joint Flanges