Aluminium Alloy Perforated Sheets
ACE ALLOYS LLP is one of the well-known dealer and stockiest for quality Aluminium Alloy Perforated Sheets , which does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain - proof in low - oxygen, high - salinity, or poor air - circulation environments. They are highly alloyed and have a corrosion resistance comparable to high performance austenitic like 254 SMO.
By utilizing our years of experience, ACE ALLOYS LLP brings forth a qualitative array of Aluminium Perforated Sheets, which is used where both the properties of steel and corrosion resistance are required. There are various grades and surface finishes to suit the environment the alloy must endure. By lowering total material weight, you also lower transportation and assembly costs, reducing environmental impacts even further – making duplex stainless steel a genuine material of the future.
The basic idea of Aluminium Alloy Chequered Plates offered by ACE ALLOYS is to produce a chemical composition that leads to an approximately equal mixture of ferrite and austenite. The high chromium and molybdenum content also gives perforated Sheets a high resistance to acids that could cause pitting. It has with moderate / good strength and good general corrosion / stress corrosion cracking resistance. It has high performance, high strength and chromium strands and wire ropes with outstanding corrosion resistance.
ACE ALLOYS also offer these Perforated Aluminum Sheet Metal in different sizes, shapes and designs as per customers’ specifications at affordable rates.
Specification for Aluminium Alloy 5083/5086/6013/6061 Perforated Sheets
|Perforated Size||From 0,4 mm. to 120 mm.|
|Sheet Thickness||From 0,4 mm to 12 mm. (depending on perforation)|
|Size||2.000 mm. wide in sheets (depending on perforation).
1.500 mm. wide in roll (depending on perforation).
|Common Hole Size||1/32", 1/16", 3/32", 1/8", 3/16", 1/4", 3/8" and 1/2", 3/4" and 1"|
|Standard Perforated Sheet Size||4' x 10'|
|Grade||Aluminium Alloy 1100 / 2024 / 2124 / 3003 / 5052 / 5083 / 5086 / 6013 / 6061 / 7050 / 7075 / 7475 Perforated Sheets|