Alloy Steel Strip, Sheets, Plates & Coils
ACE ALLOYS LLP is one of the prominent trader and exporter of Alloy Steel Strip, Sheet, Plates & Coils , which can be easily welded and processed by standard shop fabrication practices. It contains between 16 and 24 percent chromium and up to 35 percent nickel — as well as small amounts of carbon and manganese. Alloy Steel Strips offered by ACE ALLOYS should be considered for applications requiring intermittent heating between 800 Degree F (427 Degree C) and 1650 Degree F (899 Degree C), or for welding under conditions which prevent a post-weld anneal.
The slightly higher price point of this alloy is well worth it in areas with high chloride exposure, especially the coast and heavily salted roadways. Alloy Steel Sheets is often used at cryogenic temperatures, with excellent toughness to -450 Degree F, and low magnetic permeability. It is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications.
Alloy Steel Plates offered by ACE ALLOYS does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain - proof in low - oxygen, high- s alinity, or poor air-circulation environments. The resistance to sulphur - containing gases of Alloy Steel Coils makes it an attractive material for such applications as coal - gasification units, burners and ducts for processing sulphuric acid. ACE ALLOYS also offer these products in different sizes, shapes and designs as per customers’ specifications at affordable rates.
|Standard||ASTM A387, ASME SA387|
|Grade||A387 Gr. F 5, F 9, F 11, F 12, F 22, F 91|
|Range||5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length|
|HSS in Grade||M2, M3, M35, M42 Etc.|
|Finish||2B, 2D, HR,CR, BA NO(8), SATIN (Met with Plastic Coated), Hot rolled plate (HR) Cold rolled sheet (CR)|
|Form||Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate.|
|Other Services||Heat Treatment, Anneling, Pickling, Polish, Electroplating, Anodising, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.|