Stainless Steel Strip, Sheets, Plates & Coils
ACE ALLOYS LLP is one of the prominent Exporter & trader of Stainless Steel Strip, Sheet, Plates & Coils , which has slightly improved corrosion resistance in strongly oxidizing environments. It is also advantageous for high temperature service because of its good mechanical properties. Stainless Steel Strips offers higher creep and stress rupture properties, which might also be considered for exposures where sensitization and inter - granular corrosion are concerns. It is a columbium (niobium) / tantalum stabilized austenitic chromium - nickel stainless steel which was developed to provide an 18 - 8 type alloy with improved inter - granular- corrosion resistance.
Stainless Steel Sheets offered by ACE ALLOYS has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum. It is the higher carbon (0.04 – 0.10) version of the alloy, and is developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).
Stainless Steel Plates offered by ACE ALLOYS does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. It should be considered for applications requiring intermittent heating between 800 Degree F (427 Degree C) and 1650 Degree F (899 Degree C), or for welding under conditions which prevent a post-weld anneal. ACE ALLOYS also offer these Stainless Steel Coils in different sizes, shapes and designs as per customers’ specifications at affordable rates.
304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420, 430, 446, 202 Etc.
|Sheet Finishing||2B, 2D, HR, CR, BA (No. 8), Satin (Met with PVC Coated)|
|Sheet & Plate in Form of||Coils, Foils, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) Etc.|
|Thickness||0.3 mm to 120 mm|
|Size||1000 x 2000, 1220 x 2440 (4′ x 8′), 1250 x 2500, 1500 x 3000 To 6000, 2000 x 4000 To 6000|
|Value Added Service||Cladding Heat Treatment Annealed||Pickling, Polish Rolling Cutting||Bending Forging Minor Fabrication Etc.|
|Specialize||Shim Sheet, Perforated Sheet (Round, Square &
Oblong Hole) & as per your Drawing